How Do You Connect Your Programming Device/Pc - Siemens SIMATIC S7-300 Quick Start Manual

Installing and Wiring Your S7-300

How Do You Connect Your Programming Device/PC?

Connecting a
Connect your programming device/PC to your S7-300 via an MPI cable. The
Programming
MPI cable is included with your programming device.
Device/PC to an
Figure 3-2 shows how the multipoint interfaces on the programming device
S7-300
and on your S7-300 are connected by an MPI cable:
Figure 3-2 Connecting a Programming Device to an S7-300 via a Multipoint Interface
Figure 3-3 Left-Hand Side of the Programming Device with the Multipoint Interface
Switching On the
Now switch on the CPU of your S7-300 and turn the key to RUN-P.
CPU
3-6
Programming device
Left side of the programming device
Multipoint interface (MPI)
Primer: S7-300 Programmable Controller, Quick Start
S7-300
MPI cable
C79000-G7076-C500-01