Assembling The M7-400 - Siemens S7-400 Installation Manual

Assembling the M7-400

This Chapter
The assembling of an M7-400 automation computer is largely identical to that of an
S7-400 programmable controller. Most of the instructions in the S7-400 chapters
can therefore be applied to the M7-400. Wherever details relate specifically to the
M7-400, these are pointed out to you at the beginning of each S7-400 chapter with
a cross-reference to the corresponding M7-400 section.
The headings of the second-digit sections of this chapter are largely the same as
those of the corresponding S7-400 chapter to guide you through the text.
Chapter Overview
Section
8.1 Mechanical Configuration
8.2 Addressing the M7-400 Modules
8.3 Electrical Configuration
8.4 Installing the M7-400
8.5 Connecting a Module Assembly
8.6 Assembling an MPI Subnet or PROFIBUS-DP Subnet
8.7 Preparing for Operation
8.8 Replacing Modules and Submodules/Cards
S7-400 and M7-400 Programmable Controllers Hardware and Installation
A5E00069481-04
Description
8
Page
8-2
8-5
8-6
8-8
8-29
8-30
8-32
8-46
8-1