Application; General - Brink Elan 16 2.0 Installation Instructions Manual

2.1 General

installations where hot water supply is available.
The appliance is also suitable for district heating.
The electric power consumption is reduced strongly because a
under all conditions of use.
It is possible to combine the Elan air heater with the heat reco-
very unit Renovent Excellent or Renovent Elan.
The air quantity is automatically adapted to the outlet tempera-
ture of the appliance. All this results in very stable room tempe-
rature, realising a perfect interior climate.
The Elan appliance is available in three versions:
Ex factory, the Elan 10 is always supplied in Down-
version; the Elan 16 and Elan 25 are always
supplied ex-factory in
sion and the Elan 16 and Elan 25 appliances are always sup-
3
3
1
version! The installer
-
-
2
1 = Hot air
2 = Return air ex factory
3 = Options for connection return air after
o in ter or ountin
Elan 10 2.0 / Elan 16 2.0 / Elan 25 2.1 Revision D
This provision ensures that the heat exchanger cannot freeze.
The appliance comes ready to plug in. When it is placed, the
appliance must be connected to the system air ducts, the con-
the mains power.
It is possible to connect a separate ventilation switch. This
switch makes it possible to set the appliance at 4 different mo-
des; see § 5.11.2.
The Elan appliance can also be set for outdoor air control (see
2
ter unit
1
3
3
3