Maintenance - Brink Elan 16 2.0 Installation Instructions Manual

9.2 Maintenance

Installer maintenance includes cleaning the heat exchanger
once every three years.
1 Take the voltage from the appliance.
3
and take it out.
24
4 x
Torx T20
Elan 10 2.0 / Elan 16 2.0 / Elan 25 2.1 Revision D
4 Unscrew the 8 screws that hold the fan compartment pa-
nel.
5 Carefully tilt the fan panel forward; take the fan cables from
the cable clips so the panel can be opened further.
6 Take the two fan cables from the pcb.
X10
2 x
T20 x 25 mm
6 x
T20 x 10 mm
X11