Connection Examples Multiple Switch - Brink Elan 16 2.0 Installation Instructions Manual

11.2 Connection examples multiple switch

A multiple switch can be connected to the modular connector X2 of the Elan appliance. This modular connector X2 can be accessed
B
C
X2
230V 50Hz
A = an app iance
B = u tip e s itc it
C = odu ar ca e 6 core
menu
230V 50Hz
A = an app iance
B = Receiver for ire ess remote contro
C = Transmitter it 4 settings
D = Transmitter it 2 settings
= Any additiona 2 or 4 settings transmitters (A maximum of 6 transmitters can e signed on to 1 receiver
= odu ar ca e 6 core
28
A
- +
menu R
ter indication
A
- +
R
Elan 10 2.0 / Elan 16 2.0 / Elan 25 2.1 Revision D
Wire colours C1 - C6 may vary dependent on
the type of modular cable used.
Note: For the modular cable used, the "tab" of both modular connectors
must be mounted facing the mark on the modular cable.
B
F
X2