Installation; Installation General; Placing The Appliance - Brink Elan 16 2.0 Installation Instructions Manual

5.1 Installation general

Installing the appliance.
4. Electric connection:
Connecting the power supply and, if applicable, a separate
Installation must take place under:

5.2 Placing the appliance

The following items should be observed when placing the Elan
appliance.
ling.
for service.
level.
output.
Unscrew 4 screws
with the doors and take out this panel so the control panel
with the mounting bracket is accessible.
panel to the front panel and rotate this control panel 180
degrees.
10
.
4x Torx T20
2x Torx T20
Elan 10 2.0 / Elan 16 2.0 / Elan 25 2.1 Revision D
dings
lings and residential buildings
ducts.
te discharge with air trap and pitch for condensate can be
-
the appliance and a free headroom of 1.8 m for cleaning the
ans that the installation room has an open connection with
the rest of the dwelling.
-
-
-
-
2x xin rac et