Connections Connectors - Brink Elan 16 2.0 Installation Instructions Manual

11.1 Connections connectors

-
menu
Connection
1 & 2
3 & 4
5 & 6
7 & 8
9
E-Sleeve Connector X1
Connector X2
Service connector
+
R
Laptop connection for installer.
Elan 10 2.0 / Elan 16 2.0 / Elan 25 2.1 Revision D
Application
Switch contact cooling
When this contact is closed, cooling is switched on
Switch contact external fault
(At fault message E107 on the display, the system fan
Connection frost safety relay
This connection is energised when frost safety is trig-
gered. It can be used, for instance, to switch an ex-
ternal pump.
Connection cooling relay
It is energised when cooling is switched on.
cooling is connected here.
Not connected
eBus
Two-pole screw connector
Only suitable for low voltage.
Not suitable
Note:
for 230 V!
Modular connector X2 for.
rpm control
Modular connector type RJ-12
Not suitable
Only suitable for low voltage.
for 230 V!
For eBus application, this con-
27