Machine Preparation & Operation - Upright SL30SL Service & Parts Manual

Work platforms, serial numbers 11200 - current
Hide thumbs Also See for SL30SL:
Table of Contents

Advertisement

M
ACHINE
All personnel shall carefully read, understand and follow all safety rules, operating instructions
Warning
before operating or performing maintenance on any Upright aerial work platform.
NEVER operate the machine within
ten feet of power lines.
THIS MACHINE IS NOT INSULATED.
operate the machine without first surveying the work area for surface hazards such as holes, drop-offs, bumps
N
EVER
and debris.
operate the machine if all guardrails are not properly in place and secured with all fasteners properly torqued.
N
EVER
and lock gate after mounting platform.
S
ECURE
all body parts clear of outriggers when extending or retracting (outrigger equipped machines only).
K
EEP
use ladders or scaffolding on the platform.
N
EVER
attach overhanging loads or increase platform size.
N
EVER
up, down and around for overhead obstructions and electrical conductors.
L
OOK
D
all loads evenly on the platform. See the back cover for maximum platform load.
ISTRIBUTE
use damaged equipment. (Contact UpRight for instructions. See toll-free phone number on back cover.)
N
EVER
N
change operating or safety systems.
EVER
I
the machine thoroughly for cracked welds, loose hardware, hydraulic leaks, damaged control cable, loose wire
NSPECT
connections and wheel bolts.
climb down elevating assembly with the platform elevated.
N
EVER
perform service on machine while platform is elevated without blocking elevating assembly.
N
EVER
recharge battery near sparks or open flame; batteries that are being charged emit highly explosive hydrogen gas.
N
EVER
secure the work platform against unauthorized use by turning key switch off and removing key.
A
U
FTER
SE
replace any component or part with anything other than original UpRight replacement parts without the manu-
N
EVER
facturer's consent.
SL26/30SL Work Platform
S e c t i o n 2
P
REPARATION
Safety Rules
NEVER elevate the platform or drive
elevated on uneven slopes or soft
ground unless the platform is level.
& O
PERATION
NEVER sit, stand or climb on guard-
rail or midrail.
2-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl26sl

Table of Contents