Page 3
Please note: The Upright X-27-33-40-RT is also sold as the Snorkel SR Series in some regions. Therefore any reference to the Snorkel SR Series also applies to the UpRight X-27-33-40-RT . UpRight Powered Access HQ Vigo Centre Birtley Road Washington Tyne &...
Page 4
LIMITED WARRANTY Snorkel warrants each new machine manufactured and sold by it to be free from defects in material and workmanship for a period of one (1) year from date of delivery to a Customer or for one year after the machine has been placed in first service in a Dealer rental fleet, whichever comes first.
General Specifications General Specifications SR3370 SPECIFICATIONS SR3370 12.12m 39' 2” Nominal working height 1200mm 48” Roll out deck size 0 to 4.5kph 0 to 2.8mph Drive speed (below 2.4m) 0 to 0.35kph 0 to 0.22mph Drive speed (above 2.4m) 450kg 990lbs Safe working load - Main deck...
General Specifications General Specifications SR2770 SPECIFICATIONS SR2770 10.28m 33' 9” Nominal working height 1200mm 48” Roll out deck size 0 to 4.5kph 0 to 2.8mph Drive speed (below 2.4m) 0 to 0.9kph 0 to 0.6mph Drive speed (above 2.4m) 580kg 1280lbs Safe working load - Main deck...
General Specifications Engine Data ENGINE MAKE KUBOTA(gasoline) KUBOTA (LPG) KUBOTA (diesel) Model WG750-G D905-B Fuel gasoline diesel no. 2-D Fuel Grade Unleaded 85 octane ASTM no. 2-D (motor method) Gas Processors ASTM D975 Association Standard centane no. > 44 2140 Do not use gasoline (For operating temp.
Maintenance Information About this Manual: hydraulic schematics and individual components such as cylinders, controls valves and solenoid This Maintenance and Repair Parts manual covers operated valves. current production machines only. While Snorkel has attempted in every way to Electrical confirm that all information in this manual is correct, Electrical (Section 3), contains listings and improvements are being constantly made to the drawings of electrical components installations...
Maintenance Information The following list is a gentle reminder when them from unit. This will assure that they are disassembling or assembling the machine. correctly reinstalled. Proper assembly is critical to the successful Always be conscious of weight. rebuilding of any unit. Carefully inspect any parts Never attempt to lift heavy objects without the aid of which are to be reused.
Maintenance Information 90 Day or 150 Hour Maintenance (Trained Service Technician) COMPONENTS SERVICE REQUIRED RECOMMENDED LUBRICANT OR FURTHER INSTRUCTIONS Daily maintenance Perform maintenance as per schedule Preventive inspection Perform inspection, complete form Retain copy of checklist maintenance checklist Placards & decals inspection Inspect using drawing and parts listing Replace any missing or in section 1 (repair parts)
Maintenance Information Includes center pivot pins 1,2,3,4 Inside Inside Inside compartment Inside compartment engine cabinet cabinet The drawing locates the lubrication points of the SR Lubricants Lubrication Specific lubricants as recommended by Snorkel, Refer to the above lubrication drawing for location should be used in maintaining your unit.
Maintenance Information interval or more frequently under extreme working Engines (Item 5) conditions. Other than daily Operator’s maintenance outlined in the Daily Inspection and Maintenance schedule, all When changing the filter element, the oil inside of other engine maintenance information is found in the filter element, should be examined for deposits the manufacturer’s instruction manual.
Page 17
Maintenance Information DANGER Lead-acid batteries produce flammable and explosive gases. NEVER allow smoking, flames or sparks around batteries. SR3370 & SR2770 (CE) – 12864B page 13...
Maintenance Information Preventive inspection maintenance 90 day or 150 hour checklist OK OK - No Service Required Serial Number Corrective Action Required Corrected, (Record description of corrective action). Inspection Procedures Codes CHECK (1) Weld cracks, dents and/or rust BASE CONTROL STATION (2) Installation Key switch, main power ON - OFF (4) (3) Leaks...
Page 19
Maintenance Information CHECK CHECK ENGINE HYDRAULIC RESERVOIR & RETURN FILTER Air filter (5) Translucent hydraulic oil reservoir (3,5) Belts and hoses (5) Filler/breather cap (6) Hydraulic pump (4) Hydraulic fluid level (2,5) Engine oil (5) Return filter (2,5,6) Engine START - STOP (4) Return filter element (5) Electric throttle (4) Engine coolant level (5)
Maintenance Information 5. If a release tool is not available, a thin blade Servicing STC Fittings screwdriver may be used (larger fitting sizes IMPORTANT may require two screwdrivers). Follow step 4 above. These units use Aeroquip STC hydraulic Use with care - a screwdriver could damage fittings.
Maintenance Information 2. Align the STC fitting on the hose assembly Inspect to verify proper location of O-Ring in with the STC connector, and push the hose the connector (See Figure 3). Leakage could fitting into the mating STC connector until occur if installed incorrectly.
Maintenance Information Auto Level System Troubleshooting WARNING If the auto level system fails to level the Incorrect use of the EZcal could lead to machine there could be electrical or safety issues and result in damage to the hydraulic problems. machine.
Maintenance Information 5. LR / P2-1 will appear in the display: 1. Manually level the machine on its stabilisers. High will be displayed when the left rear 2. Plug the EZcal into the auto level board (see outrigger is in contact with the ground and Figure 1) Low will be displayed when it is not.
Page 25
Maintenance Information MACHINE SETUP: CALIBRATE LEVEL 10. Press [ENTER]. The display screen will show: CALIBRATE LEVEL: YES:ENTER.NO:ESC 11. Press [ESC] to abort the calibration or [ENTER] to proceed with the calibration process. If [ENTER] is selected the display screen should show: CALIBRATE LEVEL: TILT 0.0’.0.O’...
Maintenance Information To order service or repair parts Manuals When placing an order for service or repair parts, Manuals are available from Snorkel to support any please have the following information available for of the machines that we produce. your machine. The specific manuals for SR3370 - SR2770 are as follows: Machine model number...
Drop axle assembly Drop axle assembly Item Part No. Description 11642A Axle cylinder assembly 12865 Mounting bracket, magnetic switch 12557 Swing arm 12557-10 Motor cover 12561 Wheel hub, rear 12563 Wheel tyre assembly, right hand, foam filled 12564 Wheel tyre assembly, left hand, foam filled 12571 Motor, hydraulic braked 12769-1...
Cable operated emergency bleed down SR3370 Cable operated emergency bleed down SR3370 Item Part No Description 12726 Bleed down handle 12724 Bridge plate 12722 Bleed down cable (short) to lower lift cylinder 12723 Bleed down cable (long) to upper lift cylinder 12722 Bleed down cable (short) lower lift cylinder 12723...
Page 41
Cable operated emergency bleed down drawing SR3370 TITLE Cable Operated Emergency Bleed Down Assembly Page 1-15 Snorkel Model SR3370...
Page 42
Cable operated emergency bleed down drawing SR2770 TITLE Cable Operated Emergency Bleed Down Assembly Page 1-16 Snorkel Model SR2770 DWG. 00000...
Cable operated emergency bleed down SR2770 Cable operated emergency bleed down SR2770 Item Part No Description 12748 Bleed down handle and cable to lift cylinder 12748 Bleed down cable 3603-06 Plain washer 3605-06 Spring washer 3610-06012 Bolt 12648 Valve lever 3611-06 Nyloc nut 3641-06...
Upper control box mounting assembly Upper control box mounting assembly Item Part No. Description 3603-06 Plain washer 3605-06 Spring washer 3610-06012 Metric bolt 3610-06020 Metric bolt 3611-06 Nyloc nut 11690-16 Security pin 12749 Wrist support 12750-25 Plug, round 12751 Hand grip, foam 12756 Star washer with end cap 72404...
Placards and decals installation Placards and decals installation Item Part No Description 1843 Decal, warning New Zealand only 9428 Decal, electrical hazard Australia only 9208 Decal, water 96924-9 Decal, warning stripes yellow/black 0070901E Decal, serial number 9751 Decal, New Zealand made 12671 Decal, SR3370 11345-1...
Hose Part Numbers and Colour Codes Hose Part Numbers and Colour Codes READING HOSE TAGS Colour 1 Colour 2 Hose tags are read from the fitting side of the hose in towards the hose. As such colour 1 is the closest to the fitting, Hose part numbers and colour codes colour 2 the next colour then 3, 4 etc…...
Hydraulic oil tank assembly drawing Hydraulic oil tank assembly drawing H Y D R A U C H E L IC F L U F L U ID L E V E U S E L E V P R E IT H M IU P L A...
Scissor Loom Lower Control Box Colour coded wiring circuit J1.1 Platform Speaker J1.1 Platform Speaker + Platform Key Switch J1.2 Platform Key Switch Out J1.2 J1.3 Proportional High Output J1.3 Proportional High Output Drive Reverse From Platform J1.4 Drive Reverse From Platform J1.4 J1.5 Drive Forward From Platform...
Page 80
Ground control box assembly drawing CLIP OUT FOR GAS CLIP OUT ONLY FOR DUAL FUEL DUAL FUEL DUAL FUEL ONLY CLIP OUT FOR LP ONLY TITLE Ground control box assembly Snorkel Models SR3370 Page 3-6 & SR2770...
AC outlet at platform, 230 volt AC outlet at platform, 230 volt Item Part No Description 10967-3 PDL enclosure 10967-1 Residual current device (with appliance inlet pins) 1814 M20 nylon cable gland 10967-2 Appliance inlet 2500-014 Switch outlet 1812 3 core x 1.5 tpe flex cable page 4 - 2 SR3370 &...
Page 91
AC outlet at platform 230V drawing TOE BOARD RIGHT-HAND SIDE DECK RCD MOUNTED AT BASE TITLE AC outlet at platform 230 volt Snorkel Models SR3370 & SR2770 Page 4-3...
Fuel gauge option Fuel gauge option Item Part No Description 11507 Fuel gauge option 11430-9 Top plate fuel tank 0070483 Fuel gauge 11430-5 Gasket 11430-1 Base plate weld 3611-06 Nylock nut page 4 - 6 SR3370 & SR2770 (CE) – 12864B...
Page 95
Parts index - Page locator 230 Volt AC outlet at platform, 4-2 AC outlet at platform, 230 volt AC, 4-2 Decal and placards installation, 1-32 Gradeability, 2-3, 2-4 Ground clearance, 2-3, 2-4 Ground control box assembly, 3-7 Insulation rating, 2-3, 2-4 Joystick controller, 3-12 Key switch, 3-8 Lift time, 2-3, 2-4...
Page 98
Local Distributor: Lokaler Vertiebshändler: Distributeur local: El Distribuidor local: Il Distributore locale: Europe TEL: +1 (559) 443 6600 TEL: +44 (0) 845 1550 058 FAX: +1 (559) 268 2433 FAX: +44 (0) 195 2299 948 www.upright.com...
Need help?
Do you have a question about the X27RT and is the answer not in the manual?
Questions and answers