Ami Bios - Eurotech ALUDRA User Manual

AMI BIOS

A licensed copy of AMI BIOS is pre-programmed into the ROM BIOS. The BIOS setup
program allows users to modify the basic system configuration. This chapter describes
how to access the BIOS setup program and the configuration options that may be
changed.
Starting Setup
The AMI BIOS is activated when the computer is turned on. The setup program can be
activated in one of two ways.

Press the D

Press the D
the screen.
If the message disappears before the D
try again.
Using Setup
Use the arrow keys to highlight items, press E
PageDown keys to change entries, press F1 for help and press E
keys are shown in.
Key
Up arrow
Down arrow
Left arrow
Right arrow
Esc key
Page Up key
Page Dn key
F1 key
F2 /F3 key
F10 key
Getting Help
When F1 is pressed a small help window describing the appropriate keys to use and the
possible selections for the highlighted item appears. To exit the Help Window press E
or the F1 key again.
Issue A
key as soon as the system is turned on or
ELETE
key when the "Press Del to enter SETUP" message appears on
ELETE

ELETE
Function
Move to previous item
Move to next item
Move to the item on the left hand side
Move to the item on the right hand side
Main Menu – Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu --
Exit current page and return to Main Menu
Increase the numeric value or make changes
Decrease the numeric value or make changes
General help, only for Status Page Setup Menu and
Option Page Setup Menu
Change colour from total 16 colours. F2 to select colour
forward.
Save all the CMOS changes, only for Main Menu
Table 37: BIOS Navigation Keys
key is pressed, restart the computer and
to select, use the PageUp and
NTER
to quit. Navigation
SC
AMI BIOS
SC
77