See Two Sources At The Same Time - Bang & Olufsen BEOPLAY V1 Series Manual

See two sources at the same time

Your Beo4/Beo6 remote control
gives you access to a dual-screen
function for viewing two video
sources at the same time. For
example, you can view playback
from a Blu-ray player and a TV
programme at the same time,
provided that the selected
sources are available in your
system.
There are some limitations when using
the Picture-and-Picture (P-AND-P)
function since some source combinations
may not be possible. For example, you
cannot watch two HDMI sources at the
same time. When an invalid combination
is selected, an on-screen message
appears on the television screen.
To view a source registered in the
SOURCE LIST SETUP menu as V.AUX,
such as a set-top box, press LIST and use
the navigation button up or down until
P-V.AUX is shown in the Beo4 display.
A
A
Volume adjustment always affects picture A,
while other operations, such as selecting
channels, affect picture B. Selecting a new
source cancels P-AND-P viewing.
20
While watching, for example, television
from your set-top box ...
Beo4 operation ...
Press to bring up P-AND-P
Press, for example, DVD to
B
select the source to view on the
right side of the screen (B)
Press to swap the left picture
and right picture
B
Press to bring up P-AND-P to
switch between small and large
for the left and right picture
Beo6 operation ...
Press to bring up the P-and-P
display
Press, for example, DVD to
select the source to view on the
right side of the screen (B)
Press to swap the left picture
and right picture
Press to switch between small
and large for the left and right
picture
To leave the dual-screen function ...
Press to leave the function and
return to normal viewing of the
source on the left side of the
screen (A) or simply select a
source
LIST
P-AND -P
DVD
MENU
0
LIST
P-AND -P
P-and-P
DVD
Swap
Size
BACK