Table of Contents
Advertisement
NS-RNE4BWH8-C_17-0680_User MAN_V2_ENG.fm Page 9 Monday, September 18, 2017 1:12 PM
Using the radiant surface units (on some
models)
About the Radiant Surface Units
Always place the pan in the center of
the surface unit you are cooking on.
WARNING :
disabled during the self-clean cycle. Make sure that all surface
unit controls are turned off at all times during the self-clean
cycle. Any surface unit that is set to an on position, while the
self-clean cycle is operating, will automatically come on after the
self-clean cycle is finished. Wait until the self-clean cycle is finished to set
and use the surface units.
The radiant cooktop features heating units beneath a smooth glass
surface. Cooktop temperatures increase with the number of surface units
that are on. With 3 or 4 units turned on, surface temperatures are high.
Always use caution when touching the cooktop. An indicator light will
come on when the surface unit is turned on. The appropriate HOT surface
indicator light will glow when its corresponding radiant element is turned
on and will remain on until the surface has cooled below 65.5°C (150°F).
Note
Throughout this manual, features and appearance may vary
from your model.
Never cook directly on the
glass. Always use cookware.
The surface units are automatically
Note
A slight odor is normal when a new cooktop is used for the first
time. It is caused by the heating of new parts and insulating
materials and will disappear in a short time.
www.insigniaproducts.com
4-Burner Electric Range
Do not slide cookware across the
control or cooktop surface
because it can scratch the glass.
The glass is scratch-resistant,
not scratch proof.
9
Hide quick links:
Advertisement
Table of Contents
