Insignia NS-RNE4BWH8-C User Manual page 42

NS-RNE4BWH8-C_17-0680_User MAN_V2_ENG.fm Page 42 Monday, September 18, 2017 1:12 PM
PROBLEM
Surface units not functioning
properly
OVEN-ALL MODELS
Oven light does not work
Oven will not work
Food does not bake or roast
properly
No power supply from convenience
outlet on top of backguard (on
some models)
Food does not broil properly
Control signals after entering
cooking time or delay start
Display flashes "bAd" then "linE"
with a loud tone
42
POSSIBLE CAUSES
The surface units are not plugged in
solidly.
The surface unit controls improperly
set.
Light bulb is loose or defective.
Switch operating light is broken.
Plug on range is not completely
inserted in the electrical outlet.
A fuse in your home may be blown or
the circuit breaker tripped.
Oven controls improperly set.
On self-cleaning models, door left in
the locked position.
Oven controls improperly set.
Rack position is incorrect or the rack is
not level.
Incorrect cookware or cookware of
improper size being used.
Oven thermostat needs adjustment.
Small appliance plug is not completely
inserted in the convenience outlet.
The backguard is too hot and the
convenience outlet breaker has
tripped.
Improper rack position being used.
Food being cooked in a hot pan.
Aluminum foil used on the broiling
pan and grid has not been fitted
properly and slit as recommended.
In some areas the power (voltage) may
be low.
You forgot to enter a bake temperature
or cleaning time.
The installed connection from the
house to the unit is miswired.
www.insigniaproducts.com
NS-RNE4BWH8-C/NS-RNE4BSS8-C
WHAT TO DO
With the controls off, check to make sure the
surface unit is plugged completely into the
receptacle.
Check to see the correct control is set for the
surface unit you are using.
Tighten or replace the bulb.
Call for service.
Make sure electrical plug is plugged into a live,
properly grounded outlet.
Replace fuse or reset circuit breaker.
See the Using the oven section.
If necessary, allow the oven to cool, then unlock
the door.
See the Using the oven section.
See the Using the oven section.
See the Using the oven section.
See the Adjust the oven thermostat–Easy to do
yourself! section.
Make sure the small appliance plug is properly
inserted.
Allow the range to cool; then reset the circuit
breaker by pressing the switch located near the
convenience outlet.
See the Broiling guide.
Use the broiling pan and grid that came with
your range. Make sure it is cool.
See the Using the oven section.
Preheat the broil element for 10 minutes.
Broil for the longest period of time
recommended in the Broiling guide.
Press the BAKE pad and desired temperature or
the CLEAN pad and desired clean time.
Contact installer or electrician to correct
miswire.