1.2.2
I/O and Function
Front I/O Connector
–
Ethernet 1: RTL8111E GbE compliant to 802.3ab, 802.3u
–
Ethernet 2: RTL8111E GbE compliant to 802.3ab, 802.3u
–
VGA: Up to1920 x 1200 resolution
–
HDMI: HDMI 1.4b up to 2560 x 1600 @ 60 Hz
–
USB: 2 x USB3.0, 2 x USB2.0
–
LED Indicator: Power, SATA Act#
Rear I/O Connector
–
COM1/2: RS-232, I/O pin ESD protection: air gap ±15kV, contact ±8kV
–
COM3/4: RS-232/422/485, I/O pin ESD protection: air gap ±15kV, contact
±8kV
–
DIO: 8-bit GPIO
–
USB: 2 x USB2.0
–
Audio: Line-in, Line-out, MIC, ALC892
–
Power Switch: AT power switch
Expansion Socket
–
miniPCIe: Full size mini-PCI w/ SIM holder, PCIe Gen2 (5.0 GT/s) & USB2.0
–
mSATA: Full size mSATA, SATA Gen3 (6.0 Gb/s) & USB2.0, optional miniP-
CIe
Storage: Optional support 2.5" SATA SSD (Gen3 6.0 Gb/s)
–
SATA Power: 5V / 12V
Antenna: Two reserved antenna holes on both front side and rear sides.
Watchdog Timer: Single chip Watchdog 255-level interval timer, setup by soft-
ware.
1.2.3
Power Specification
Power Type: AT
Power Input Requirement: 12V +/- 10%
Power Connector Type: 2-pole Phoenix DC Plug-in
RTC Battery: Build-in Lithium coin battery 3V, 210mAh
1.2.4
Environment
Temperature
–
Operating: 0 ~ 50° C (32 ~ 122° F) w/ 0.7m/s airflow
–
Storage: -40 ~ 85° C (-40~185° F)
Humidity:
–
Operating: 40° C @ 95% relevant humidity, non-condensing
–
Storage: 60° C @ 95% relevant humidity, non-condensing
Vibration: With mSATA/SSD: 3 Grms, IEC 60068-2-64, random, 5 ~ 500 Hz, 1
hr/3-axis
Shock: With mSATA/SSD: 30G, IEC 60068-2-27, half sine, 11 ms duration
EMC: CE/FCC Class B
EPD-B101 User Manual
3