Removing And Replacing The Battery; Removing The Battery; Replacing The Battery; Hot Swapping The Battery - Xplore iX101L1 User Manual

Removing and Replacing the Battery

Before you remove the battery, save your files and shut down the tablet, or plug in the AC adapter
and continue working while the battery charges. However, if you are hot swapping the battery, you
can do so while the tablet is on and running only on battery power. See
on page 16 (below).

Removing the Battery

1. Save your files and shut down the tablet.
2. With the back of the tablet facing you, slide the battery latch to the left until the latch
3. Insert your finger under the finger tab and pull to remove the battery from the battery

Replacing the Battery

1. Place the tabbed end of the battery into the battery compartment as shown here.
2. Press the battery down until it snaps into place.

Hot Swapping the Battery

Changing a battery while the tablet is on is called hot swapping. You can hot swap a battery only if
you have a second, charged battery to replace it with.
Important:
the battery within one minute, the tablet goes into Sleep mode.
1. Remove the battery.
2. Insert the new battery.
16 Using the Battery
stays open and the battery pops out slightly.
compartment.
Slide latch
to the left
Insert this end of
the battery first.
You have approximately one minute to hot swap the battery. If you haven't replaced
Hot Swapping the Battery
Pull the
finger tab
Chapter 2 Using Your L10 Tablet