If You Have An External Battery Charger; Removing And Installing The Battery; Removing The Battery - Xplore iX104C5 User Handbook Manual

iX104C5 User's Handbook
Table 4 shows the approximate time required to charge the battery
level to 100%.
Table 4 Approximate battery charge time
Battery pack capacity
55 watt hours (7600 mAh)
68.5 watt hours (9250 mAh)

If you have an external battery charger

Remove the battery pack (see page 47).
1.
Use the external battery charger to charge the battery.
2.
Install the battery (see page 49).
3.

Removing and installing the battery

You can remove the battery and use an (optional) external charger to
charge it.

Removing the battery

1. To swap with a charged battery:
Use one of the methods described in "Suspending operation"
on page 30 to suspend operation.
If a charged battery is not available:
Save your work and close all running programs; then shut
down the computer or put the computer in Hibernation mode
(see "Suspending operation" on page 30).
Note: To avoid losing unsaved data, wait until the computer
has completed switching to Hibernation mode before
removing the battery.
Chapter 2. Using the Tablet
Charge time Battery pack P/N
1.5 hours 11-01018
2.5 hours 11-01019
Using the battery
47