Using The Fingerprint Reader; Setting Up A Pin; Setting Up The Fingerprint Reader - Xplore iX101L1 User Manual

Using the Fingerprint Reader

You can use the fingerprint reader to log on to the Tablet PC by scanning your fingerprint instead of
entering a password. This feature provides an additional level of security for the tablet.
Note:

Setting Up a PIN

Important:
then you can skip these steps and go to
1. Tap the Windows Start icon,
2. Tap the Accounts icon.
3. In the left pane, tap Sign-in options.
4. In the right pane of the Sign-in options, under Pin, tap Add.
5. Enter your PIN and tap OK.
Now you can set up the fingerprint reader.

Setting Up the Fingerprint Reader

After you have a PIN, the Windows Hello section of the Sign-in Options is enabled and you can set up
your fingerprint.
1. Tap the Windows Start icon,
2. Tap the Accounts icon.
3. Tap Sign-in options in the left pane.
4. In the Windows Hello section under Fingerprint, tap Set up.
5. In this window, tap Get started.
6. Enter your PIN.
7. Decide which finger to use.
Chapter 2 Using Your L10 Tablet
These instructions assume that you have a password for logging into your tablet.
To use the fingerprint reader, you need to set up a PIN. If you already have a PIN,
The Settings window appears.
The Accounts window appears.
The Windows Settings menu appears.
A welcome window appears.
Setting Up the Fingerprint Reader
, and tap the Settings icon,
, and tap the Settings icon above it.
Using the Fingerprint Reader 35
on page 35. below.
.