Table of Contents
Advertisement
• Turn to sleep when put in to drawer: Enter sleep mode upon
returning to the charging drawer.
• Turn to sleep when put in to cradle: Enter sleep mode upon
returning to the charging cradle.
Hiding Screen & Display Items
To configure the screen display options (e.g. hide system bar, virtual
buttons) in Admin mode and User mode:
1.
Select Application drawer > Settings > Display > Admin mode
hide configuration / User mode hide configuration.
2.
Check the checkbox to enable the display options, and then click
OK to exit.
Changing Battery Charging Policy
To adjust the charging trigger level:
1.
Select Application drawer > Settings > Battery.
2.
Select Smart charging > Smart charging settings.
3.
Select the checkbox to enable smart charging.
4.
Drag the slide bar to adjust the charging trigger level, and then click
OK.
Changing Language
1.
Select Application drawer > Settings > Language & input
2.
Select Language.
3.
Select a language
Adjusting Date & Time
1.
Select Application drawer > Settings > Date & time.
2.
To set the date and time manually, adjust Set date, Set time, and
Select time zone accordingly.
14
Performing System Backup
To perform system backup:
1.
Select Application drawer > System Backup.
2.
Select the Backup button.
3.
Edit the Backup path if needed. This is the folder name of the
backup image.
4.
Select Internal storage or SD card from the Backup Location drop
down menu.
OS: Backup OS only.
DATA: Backup installed applications, settings, and data.
OS+DATA: Backup OS, installed applications, settings, and data.
5.
Select a backup data option from Backup selection drop down
menu.
6.
To restore the back up image on the current device only, select the
Need to match serial no. checkbox.
7.
Select Start, and then click OK when prompted.
8.
The device reboots automatically upon completing the backup.
Note:
• Close all active programs before performing backup or restore.
• The backup image folders are grouped in a folder named backup.
15
Advertisement
Table of Contents
