Using The Built-In Microphones - Xplore iX101L1 User Manual

7. Tap Pin to taskbar to put the icon on the taskbar.
8. Tap the Camera icon on the taskbar to start the camera application.
9. Tap the Settings icon in the upper right of
10. To remove the icon from the taskbar, press and hold the icon when the application is

Using the Built-in Microphones

You can use the built-in array microphones to record audio, dictate notes, and use voice commands.
The two microphones work together to optimize sound detection for speech recognition and voice
recording. It is necessary to use an application to enable the microphones. Applications that record
video, sound or perform video conferencing recognize these microphones and enable them.
By default, windows will route audio through the 3.5 mm jack when an audio device is plugged in to
the audio jack on the left side of the tablet.
Chapter 2 Using Your L10 Tablet
Note: You can add any tile/icon to the taskbar by following steps
the application to adjust the camera.
in use. Release the icon and tap Unpin from taskbar to remove the icon.
Note: You can remove any icon from the taskbar by following this last step.
5 to 7 in this procedure.
Using the Built-in Microphones 31
NOT