Pen Issues - Xplore iX101L1 User Manual

The display is unreadable or distorted.
The screen resolution and color quality might not be set correctly.
Use the Display menu to reset the display settings.
1. Tap the Windows Start button and tap the Settings icon.
2. Tap the System icon.
3. Tap the resolution field on the Display menu.
4. Set the resolution until the display appears normal.
The display goes black while the Tablet PC is still turned on.
The possibilities include:
•
•
•

Pen Issues

The tablet doesn't respond to the pen I am using.
•
•
48 Pen Issues
The default menu is Display.
a. The preferred resolution setting for the L10 tablet is 1920 by 1200.
b. You might also want to adjust the sizing of the items on the screen. In the Scale and
layout section, the recommended size is 150%.
The tablet might have turned off the display to save power. To restore the display, tap the
screen with your finger or the pen.
The tablet might have gone into Sleep mode. Press and hold the oval Power button for
about one second.
The tablet might have gone into low-battery Hibernation mode. In Hibernation mode, the
power status light is off. Plug the tablet in to AC power, then press and hold the power
button for about one second.
Use only the L10 pens with the L10 tablet as seen on the
Devices on the Xplore web site. The tablet might not respond to other digitizer pens. See
Pens for the L10 Tablets
If you have a long capacitive ePen with a battery, check the battery.
on page 6.
Chapter 4
Accessories section under Input
Troubleshooting and FAQs