junger C8702 Manual page 7

digital audio
modular
processing system
Important Note! If the C8702 has an unknown IP configuration you may initialize it to factory default
settings (see above). This will restore the factory default IP configuration.
2.3 Open a browser and enter the default IP address
2.4 On the web site click on the spanner tool
This opens the "SYSTEM CONFIG" tab of the Frame CONTROLLER setup.
2.5 Enter the desired NETWORK configuration:
2.6 Press <CHANGE NETWORK CONFIGURATION>
2.7 Reboot the C8702:
In order to make the IP configuration permanent you must reboot the frame controller.
C8000
Frame Controller
C8702
in the URL field:
Page 7/23