junger C8702 Manual page 21

digital audio
modular
processing system
Important Note! The module for replacement
address. If a different module type is used with the same CAN address as the one removed,
you must reboot the Frame Controller!
Under some circumstances the browser session with the web server of the C8702 Frame Controller
will expire.
In this case you must reload [F5] or close the browser and start it again in order to open a new session.
To change values of parameters more comfortably we use a little slider.
After clicking into such an input field, the slider may either be moved by the mouse pointer or the
arrow keys of the keyboard or by the mouse wheel.
Error monitoring and auto switch over on error conditions
This function is implemented for the C8402/03/04/05 SDI modules. It allows the detection of an error
condition downstream in the signal path. Such an error condition may happen if a downstream
DSP module like the C8086+ has a problem or its input signal is gone. This function offers you the
possibility to switch over to an alternative bus for fail save operation. Such an alternative bus may be
the input of the DSP module for simply bypassing it (if the moduel fails) but it may also be an
alternative audio signal such as a pre-recorded announcement.
For details see C8402/03/04/05 manual.
C8000
Frame Controller
must be of the same type and
C8702
must have the same CAN
Page 21/23