AUMA SAREx 07.2 – SAREx 16.2 Operation Instructions Manual page 3

SAEx 07.2 SAEx 16.2 / SAREx 07.2
5.4.3. Earth connection, external
6. Operation................................................................................................................................
6.1. Manual operation
6.1.1. Manual operation: engage
6.1.2. Manual operation: disengage
6.2. Motor operation
7. Indications..............................................................................................................................
7.1. Mechanical position indicator/running indication
8. Signals.....................................................................................................................................
8.1. Feedback signals from actuator
9. Commissioning......................................................................................................................
9.1. Switch compartment: open
9.2. Torque switching: set
9.3. Limit switching: set
9.3.1. End position CLOSED (black section): set
9.3.2. End position OPEN (white section): set
9.4. Intermediate positions: set
9.4.1. Running direction CLOSE (black section): set
9.4.2. Running direction OPEN (white section): set
9.5. Test run
9.5.1. Direction of rotation: check
9.5.2. Limit switching: check
9.6. Electronic position transmitter EWG 01.1
9.6.1. Measuring range: set
9.6.2. Current values: adjust
9.6.3. LED end position signalling: switch on/off
9.7. Potentiometer
9.7.1. Potentiometer setting
9.8. Electronic position transmitter RWG
9.8.1. Measuring range: set
9.9. Mechanical position indicator: set
9.10. Switch compartment: close
10. Corrective action....................................................................................................................
10.1. Faults during commissioning
10.2. Motor protection (thermal monitoring)
11. Servicing and maintenance...................................................................................................
11.1. Preventive measures for servicing and safe operation
11.2. Disconnection from the mains
11.3. Maintenance
11.4. Disposal and recycling
12. Technical data.........................................................................................................................
12.1. Technical data Multi-turn actuators
13. Spare parts.............................................................................................................................
13.1. Multi-turn actuators SAEx 07.2
connector and screw-type terminals (KP, KPH)
13.2. Multi-turn actuators SAEx 07.2
connector and terminal blocks (KES)
SAREx 16.2
SAEx 16.2/SAREx 07.2
SAEx 16.2/SAREx 07.2
Table of contents
SAREx 16.2 with Ex plug/socket
SAREx 16.2 with Ex plug/socket
24
25
25
25
25
25
26
26
27
27
28
28
28
29
29
30
30
31
31
31
31
32
33
34
34
35
35
35
36
36
37
38
39
39
39
40
40
40
41
42
43
43
47
47
49
3