Installation & Assembly
E
Instructions
1.0
Set the printer display:
1.1
Right click the mouse and click the display setting.
1. 2 Turn on the printer, connect the HDMI
The computer will install the Arduino Mega 2560 driver automatically.
1.3 Right click the mouse and click the display setting
1.4 Click the display No.2, then the No.2 display would be highlighted in green color.
1.5 If your display is not horizontal. Change it to horizontal by clicking Direction and
choosing the Horizontal option.
1.6 Apply the change.
and USB cables to the computer.
®
8