Table of Contents
Advertisement
• Begin: Touch the Begin button to install the updated firmware file on the inserted
microSD™ card. Once the update is complete, the printer will automatically reboot
to load the new firmware.
Contact Us Screen
The Contact Us screen displays the Monoprice™ website address and the address for a wiki
site dedicated to the MP Mini Delta V2 3D Printer.
WIIBUILDER SLICING SOFTWARE
Installation
Wiibuilder is the preferred slicing software program for use with the MP Mini Delta V2 3D
Printer and the Windows® operating system. Models sliced with Wiibuilder can be
previewed on the File Information screen. For your convenience, a customized version of
the Wiibuilder installer is included on the microSD™ card. To install Wiibuilder, double click
the Wiibuilder2.1.2.1_setup_Monoprice.exe file on the microSD card, then perform the
following steps:
1. Use the pull-down list box to select the language you
want to use in the installer, then click the OK button
to continue. The available languages are English,
Spanish, Russian, Simplified Chinese, and Japanese.
30
Hide quick links:
Advertisement
Table of Contents
