Table of Contents
Advertisement
There are two buttons for each of the available options.
- The first option has the same name as the screen itself (Slice View).
In this setting we can see (as shown in the image) each successive layer of
the generated Slicing. With the lower bar we can scroll through the entire
slicing result to check each of the layers. In the upper left corner we can see
the total number of layers that have been generated. In the lower
left corner we have a (
selected layer. This can be useful to check the positioning of the vat.
G-Code View: On this screen you can see the G-code generated during
-
the Slicing operation. This option is intended for advanced users. We
recommend to leave this screen untouched.
12. Control
Opening the Control screen shows you the following dialogues:
) button to turn the projector on and expose the
26
Advertisement
Table of Contents
