Installation; Installation Site; Installation Options - STIEBEL ELTRON MINI-E 2-1 Operation And Installation Manual

Thermostatic point of use tankless electric water heater
Hide thumbs Also See for MINI-E 2-1:
Table of Contents

Advertisement

INSTALLATION

Note:
Fitting the supplied aerator provides an optimum water
fl ow.
10. Installation

10.1 Installation site

Do not install in an area that can be exposed to temperatures below
41°F / 5°C.
Ensure access to the opening screws on both sides of the cover so
that they can be easily removed if service is necessary.
The appliance is suitable for an undersink or oversink installation. It
can be installed with water connections at the top or at the bottom.
DANGER: Electrocution
The adjusting screw for setting the temperature is 'live',
and the IP25 protection is only given when the appliance
back panel is fi tted.
WWW.STIEBEL-ELTRON-USA.COM

10.2 Installation options

10.2.1 Typical installation
1 Tee
2 Shut-off valve
MINI
-E SERIES TANKLESS ELECTRIC WATER HEATERS | 9
1
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mini-e 2.5-1Mini-e 3.5-1Mini-e 4-2Mini-e 6-2Mini-e 3-1

Table of Contents