Specifications - Mitsubishi Electric FR-A820-00046 Instruction Manual

4.3

Specifications

1.5°
Repeated positioning
Depends on the load torque, moment of inertia of the load or orientation, creep speed, position loop switching
accuracy
position, etc.
Orientation, creep speed setting, stop position command selection, DC injection brake start position setting,
Functions creep speed and position loop switch position setting, position shift, orientation in-position, position pulse
monitor, etc.
Holding force after
Under V/F control, Advanced magnetic flux vector control...without servo lock function
positioning Under vector control...with servo lock function
Input signal
Orientation command, forward and reverse rotation commands, stop position command
Binary signal of maximum 16 bits (when used with the FR-A8AX)
(contact input)
Output signal
Orientation completion signal, orientation fault signal
(open collector output)
4
19
ORIENTATION CONTROL