Download
Share
Print this page
CTC Union FRM220-1000EAS/X-2F User Manual
  1. Manuals
  2. Brands
  3. CTC Union Manuals
  4. Switch
  5. FRM220-1000EAS/X-2F
  6. User manual
CTC Union FRM220-1000EAS/X-2F User Manual

CTC Union FRM220-1000EAS/X-2F User Manual

2-port oam/ip gigabit ethernet media converter/switch
Hide thumbs

Advertisement

Quick Links

Download this manual
FRM220-1000EAS/X-2F
2-Port OAM/IP Gigabit Ethernet
Media Converter/Switch

Advertisement

loading
Need help?

Need help?

Do you have a question about the FRM220-1000EAS/X-2F and is the answer not in the manual?

Questions and answers

Related Manuals for CTC Union FRM220-1000EAS/X-2F

Summary of Contents for CTC Union FRM220-1000EAS/X-2F

  • Page 1 FRM220-1000EAS/X-2F 2-Port OAM/IP Gigabit Ethernet Media Converter/Switch...
  • Page 2 H www.ctcu.com FRM220-1000EAS/X-2F Operation Manual 2-Port OAM/IP Gigabit Ethernet Media Converter/Switch Version 1.0 August 2015 2015 CTC Union Technologies Co., LTD. All trademarks are the property of their respective owners. Technical information in this document is subject to change without notice.
  • Page 3 CTC Union Technologies makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does CTC Union assume any liability arising out of the application or use of any product and specifically disclaims any and all liability, including without limitation any consequential or incidental damages.

  • Page 4: Table Of Contents

    Table of Contents Chapter 1 Introduction ........................7 1.1 Welcome ..........................7 1.2 Product Description ........................ 7 1.3 Features ..........................7 1.4 Specifications ......................... 8 1.5 Management Features ......................8 1.6 Panel............................9 1.7 Factory Reset Procedure ....................... 9 Chapter 2 Installation ........................10 2.1 Chassis Options ........................

  • Page 5: Chapter 1 Introduction

    Based Management to become familiar with the diagnostic capabilities, and network settings. 1.2 Product Description FRM220-1000EAS/X-2F is a two-port OSI Layer 2 Ethernet switch and media converter with two Dual-Rate Ethernet fiber ports (100Base/1000Base-X). The Layer 2 switch technologies include jumbo frame support, tag based VLAN, port trunking, fiber redundancy, 802.1D Spanning Tree...

  • Page 6: Specifications

    CHAPTER 1 INTRODUCTION NOTE: Some functions are available only when 1000EAS/X-2F is used as a standalone device. If you are intended to manage 1000EAS/X-2F via NMC card, functions are limited. WARNING: Fiber optic equipment may emit laser or infrared light that can injure your eyes. Never look into an optical fiber or connector port.

  • Page 7: Panel

    LED Indicators 100/1000M transceiver Reset to Default Button Figure 1.1 FRM220-1000EAS/X-2F Front Panel 1.7 Factory Reset Procedure Apply power to 1000EAS/X-2F and allow 30 seconds to fully boot. Using a pencil or ball-point pen, press the 'DEFAULT' recessed push-button switch (located on the face plate) and hold for 5 seconds and release.

  • Page 8: Chapter 2 Installation

    CH02M or CH02-NMC-XX Chassis (XX= AC, DC, AA, DD or AD) FRM220-CH01, single slot chassis requires external AC to DC 12V switching adapter. Figure 2.1 Chassis options for FRM220-1000EAS/X-2F card Follow all ESD precautions when handling the card and SFP modules.

  • Page 9: Electrical Installation

    Figure 2.2 IEC (AC) & terminal block (DC) power connector pin assignment 2.3 Installation of SFP Modules CTC Union supplied SFP modules are of the Bale Clasp type. The bale clasp pluggable module has a bale clasp that secures the module into the SFP cage.

  • Page 10: Led Indicators

    CHAPTER 2 INSTALLATION 2.4 LED Indicators Color Status Definition The device is active. Green The device is inactive. Fiber link 100/1000Mbps is up. LNK W Green Blinking Activities present. No link. Fiber link 100/1000Mbps is up. LNK L Green Blinking Activities present. No link.

  • Page 11: Chapter 3 Provisioning Via Text Menu

    When you successfully enter the main menu of NMC console management, press the slot number that your 1000EAS/X-2F is placed. In this example, 1000EAS/X-2F is placed in Slot 9. **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 ***...
  • Page 12 CHAPTER 3 PROVISIONING VIA TEXT MENU Press <9> to enter console management of 1000EAS/X-2F. **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** **************************************** This Chassis ID:[00] Cascaded:[Yes] Monitored Chassis ID:[00] SLOT #09 >FRM220-1000EAS/X-2F - [Local ] [ Ver:1.300-1.039-0.000-0.000 ]...

  • Page 13: Fiber Port Provisioning

    PROVISIONING VIA TEXT MENU 3.2.2 Fiber Port Provisioning Select item "<1>" or "<2>" from the main menu of 1000EAS/X-2F to enter fiber port's configuration page. **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** **************************************** This Chassis ID:[00]...

  • Page 14: Fiber Port Rate Limiting

    CHAPTER 3 PROVISIONING VIA TEXT MENU <2> OAM Remote Loopback Test: This function enables or disables the remote OAM loopback test. When active, OAM loopback frames are sent and the remote equipment should acknowledge them. The link integrity can be confirmed without using IP protocol. OAM loopback is non-intrusive to normal Ethernet traffic.
  • Page 15 CHAPTER 3 PROVISIONING VIA TEXT MENU **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** **************************************** This Chassis ID:[00] Cascaded:[Yes] Monitored Chassis ID:[00] SLOT #09 >FRM220-1000EAS/X-2F - [Local ] [ Ver:1.300-1.039-0.000-0.000 ] <<< Fiber 1 Information >>>...

  • Page 16: Link Loss Forwarding

    To configure, from the main menu of 1000EAS/X-2F, select <1> or <2>. Then select <6> Link Loss Forwarding Event. **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** ****************************************...

  • Page 17: Fiber Link Alarm

    CHAPTER 3 PROVISIONING VIA TEXT MENU **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** **************************************** This Chassis ID:[00] Cascaded:[Yes] Monitored Chassis ID:[00] SLOT #09 >FRM220-1000EAS/X-2F - [Local ] [ Ver:1.300-1.039-0.000-0.000 ] <<< Fiber 1 Information >>>...

  • Page 18: Sfp And D/D Functions

    SFP, so if the function says 'No' then the inserted SFP does not support DD. To view this menu, press <D> from the Fiber Information and Status menu of 1000EAS/X-2F. Then the following page will appear. **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** ****************************************...
  • Page 19 CHAPTER 3 PROVISIONING VIA TEXT MENU The setting options are explained below. <1> Device Active: Enable or disable this device. When disabled, all traffic will be stopped immediately and all LED indicators are turned off. <2> Pause Frame: PAUSE is a flow control mechanism on full duplex Ethernet link segments defined by IEEE 802.3x and uses MAC Control frames to carry the PAUSE commands.

  • Page 20: Advanced Functions

    CHAPTER 3 PROVISIONING VIA TEXT MENU 3.2.3.1 Advanced Functions **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** **************************************** This Chassis ID:[00] Cascaded:[Yes] Monitored Chassis ID:[00] SLOT #09 >FRM220-1000EAS/X-2F - [Local ] [ Ver:1.300-1.039-0.000-0.000 ] <<<...

  • Page 21: Static 802.1Q Vlan

    CHAPTER 3 PROVISIONING VIA TEXT MENU 3.2.3.1.1 Static 802.1Q VLAN Select item <D> 802.1Q VLAN Configuration from the main menu of 1000EAS/X-2F. **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** **************************************** This Chassis ID:[00]...

  • Page 22: Static Vlan Table Configuration

    <B> VLAN Table Configuration: This menu item brings up the static VLAN table to review status or make additions or modifications. 3.2.3.1.2 Static VLAN Table Configuration Select item <B> to enter VLAN Table Configuration page. **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** **************************************** This Chassis ID:[00]...
  • Page 23 CHAPTER 3 PROVISIONING VIA TEXT MENU Select <0> VLAN ID to create a VLAN ID. ------------------------------------------------------------------------ Please input the VLAN ID : <ESC>: Go to previous menu. Please select an item. Enter the VLAN ID. Then press “Enter” key. To modify each port's tag detail, press <A> for Port 1 and <B>...

  • Page 24: Q-In-Q Vlan

    The VLAN settings are performed in the same manners as for Static 802.1Q VLAN. After the settings are completed, return to the main menu of 1000EAS/X-2F and select item <3> Device Information and Settings. **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** ****************************************...

  • Page 25: Spanning Tree Protocol

    CHAPTER 3 PROVISIONING VIA TEXT MENU From the Advanced Functions screen, select <2> Q-in-Q VLAN. The following screen will be displayed. **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** **************************************** This Chassis ID:[00] Cascaded:[Yes] Monitored Chassis ID:[00] SLOT #09 >FRM220-1000EAS/X-2F - [Local...
  • Page 26 CHAPTER 3 PROVISIONING VIA TEXT MENU From the main menu of 1000EAS/X-2F and select <3> Device Information and Settings. **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** **************************************** This Chassis ID:[00] Cascaded:[Yes] Monitored Chassis ID:[00] SLOT #09 >FRM220-1000EAS/X-2F - [Local...

  • Page 27: Mac Learning Function

    This feature allows turning off the MAC learning function of the store & forward switch for special applications or for testing. From the main menu of 1000EAS/X-2F, select the <3> Device Information and Settings. Then select <7> MAC Learning. **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** ****************************************...

  • Page 28: Remote A

    CHAPTER 3 PROVISIONING VIA TEXT MENU **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** **************************************** This Chassis ID:[00] Cascaded:[Yes] Monitored Chassis ID:[00] SLOT #09 >FRM220-1000EAS/X-2F - [Local ] [ Ver:1.300-1.039-0.000-0.000 ] <<< Device Information >>>...

  • Page 29: Oam Configuration

    CHAPTER 3 PROVISIONING VIA TEXT MENU 3.2.4 OAM Configuration Ethernet in the First Mile (EFM) is the nickname of IEEE Std 802.3ah-2004, an amendment to the Ethernet standard, specifying "Media Access Control Parameters, Physical Layers, and Management Parameters for Subscriber Access Networks". The EFM standard was approved by the IEEE Standards Board in June 2004, and officially published on September 7, 2004.

  • Page 30: Oam Mode

    The OAM in 1000EAS/X-2F converter only works on fiber links. Both units on the fiber link must be CTC Union 1000EAS/X-2F units. The OAM mode can be set to one of three choices: disabled, active or passive. In the OAM scheme, the 'active' unit will provide the OAM configuration to 'passive' unit during OAM discovery phase.

  • Page 31: Counters

    CHAPTER 3 PROVISIONING VIA TEXT MENU **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** **************************************** This Chassis ID:[00] Cascaded:[Yes] Monitored Chassis ID:[00] SLOT #09 >FRM220-1000EAS/X-2F - [Local ] [ Ver:1.300-1.039-0.000-0.000 ] <<< Fiber 1 Information >>>...

  • Page 32: Oam Counters

    CHAPTER 3 PROVISIONING VIA TEXT MENU **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** **************************************** This Chassis ID:[00] Cascaded:[Yes] Monitored Chassis ID:[00] SLOT #09 >FRM220-1000EAS/X-2F - [Local ] [ Ver:1.300-1.039-0.000-0.000 ] <1> : Fiber 1 Information and Settings.

  • Page 33: Rmon Counters

    64bit registers of the switch chip every 3 seconds and update the below counter information. From the main menu of 1000EAS/X-2F, select <6> RMON IN/OUT Counters Information. **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** ****************************************...

  • Page 34: Access Management Status And Configuration

    CHAPTER 3 PROVISIONING VIA TEXT MENU **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** **************************************** This Chassis ID:[00] Cascaded:[Yes] Monitored Chassis ID:[00] SLOT #09 >FRM220-1000EAS/X-2F - [Local ] [ Ver:1.300-1.039-0.000-0.000 ] <1> : Target IP :[ 10.
  • Page 35 CHAPTER 3 PROVISIONING VIA TEXT MENU **************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 6.17 *** **************************************** This Chassis ID:[00] Cascaded:[Yes] Monitored Chassis ID:[00] SLOT #09 > FRM220-1000EAS/X-2F [Local ] [ Ver:1.300-1.039-0.000-0.000 ] Allow Ping Setting: <A>...

  • Page 36: Chapter 4 Provisioning Via Nmc Web-Based Management

    CHAPTER 4 PROVISIONING VIA NMC WEB-BASED MANAGEMENT Chapter 4 Provisioning via NMC Web-Based Management 4.1 Introduction In an effort to make networking devices easier to configure, many devices can now be configured via a Web Page, which should be familiar to all Internet users. The NMC web page is accessed by the Default IP Address of the device from a Web Browser such as Chrome, Firefox, Safari or Internet Explorer in the following way: http://10.1.1.1/ (Assuming the Default IP Address is 10.1.1.1)

  • Page 37: Fiber Information

    CHAPTER 4 PROVISIONING VIA NMC WEB-BASED MANAGEMENT Information displayed here shows the model name of this card, firmware version and Chassis ID & Slot number where 1000EAS/X-2F is placed. 4.4 Fiber Information The upper table shows current link status, SFP information, FEF status for fiber 1 and fiber 2. Auto Laser Shutdown: This safety feature, when enabled, will disable the transmit laser if there is no received signal.

  • Page 38: 802.1Q Vlan

    CHAPTER 4 PROVISIONING VIA NMC WEB-BASED MANAGEMENT 4.6 802.1Q VLAN Management VID: By default this VID is 1. Set this to the VID that will be used to manage the 1000EAS/X-2F converter over Ethernet. VID (VLAN Identifier): a 12-bit field specifying the VLAN to which the frame belongs. A value of 0 means that the frame does not belong to any VLAN.

  • Page 39: Function Key

    CHAPTER 4 PROVISIONING VIA NMC WEB-BASED MANAGEMENT 4.8 Function Key Set Parameters: Click this button to change settings. Device Reset: Restart this device. The reset process will take a few seconds to start. Set Default: Return all settings to factory default values. Refresh Status: Click this button to reload current status.

  • Page 40: Appendix A: Firmware Upgrade Procedures

    Appendix A: Firmware Upgrade Procedures Both FRM220-1000EAS/X-1 & FRM220-1000EAS/X-2F have same firmware upgrade procedures. In this Appendix, we use FRM220-1000EAS/X-1 to illustrate firmware upgrade process. You can follow the firmware upgrade steps below to upgrade firmware of your FRM220-1000EAS/X-2F device. Prerequisites: FRM220-1000EAS/X-1 or FRM220-1000EAS/X-2F in any FRM220 chassis (1-slot, 2-slot, 4-slot, 8- slot, 20-slot).
  • Page 41 APPENDIX A FIRMWARE UPGRADE PROCEDURES 5. Start the TFTP application program by double-clicking the tftp32.exe icon. The program was extracted with the upgrade package. If the firewall complains, select ‘Unblock’. Make sure the ‘Image1000x’ file is located in the same directory as the TFTP application program. TFTP Upgrade Server...
  • Page 42 APPENDIX A FIRMWARE UPGRADE PROCEDURES 6. Start the telnet client program of your choice. In this example we are using the PuTTY program, which is open source, free, and very popular with network engineers. Key-in the IP address, select the ‘Telnet’ radio button and then click ‘Open’. 7.
  • Page 43 APPENDIX A FIRMWARE UPGRADE PROCEDURES Version 1.005 Screen ********************************************* CTC UNION TECHNOLOGIES CO., LTD. FRM220-1000EAS/X-1 Ver:1.005 ********************************************* << System Configuration >> Version [1.000-1.005-0.000-0.000] MAC Address [00:02:AB:77:77:77] NMC Action [Inactive (Stand alone)] <1> :IP Address [10.1.1.1] <2> :Subnet Netmask [255.0.0.0] <3> :Default Gateway IP [10.1.1.254]...
  • Page 44 APPENDIX A FIRMWARE UPGRADE PROCEDURES << System Configuration >> Version [1.000-1.005-0.000-0.000] MAC Address [00:02:AB:77:77:77] NMC Action [Inactive (Stand alone)] <1> :IP Address [10.1.1.1] <2> :Subnet Netmask [255.0.0.0] <3> :Default Gateway IP [10.1.1.254] <4> :Host Name [easx1] <5> :TFTP Server IP [10.1.1.100] <6>...
  • Page 45 Check that the TFTP transfer was normal by clicking the ‘Log viewer’ tab. 10. Use Telnet client and login to FRM220-1000EAS/X-2F-1 again. The following screen shows 1000EAS/X-2F-1 updated to 1.006. For a newer version, this number should reflect this new version.
  • Page 46 This page intentionally left blank...