Connecting Ac Power; Ac Power Connection - Runco High Definition Owner's Operating Manual

Plug the female end of the power cord into the AC receptacle on the rear of the
PlasmaWall. Connect the other end to your AC power source. (The XP-103DHD requires
200-240 VAC.)
XP-50DHD
XP-65DHD
XP-103DHD (NOTE: The XP-103DHD requires 200 - 240 VAC)
Figure 3-14. AC Power Connection
Similarly connect the DHD Controller to a nearby AC outlet.
PlasmaWall XP Series Owner's Operating Manual 31
Installation

Connecting AC Power