Installation
Connecting AC Power
➤
Plug the female end of the power cord into the AC receptacle on the rear of the
PlasmaWall. Connect the other end to your AC power source. (The XP-103DHD requires
200-240 VAC.)
XP-50DHD / XP-OPAL50DHD
XP-65DHD / XP-OPAL65DHD
XP-103DHD (NOTE: The XP-103DHD requires 200 - 240 VAC)
Figure 3-14. AC Power Connection
Similarly connect the DHD Controller to a nearby AC outlet.
32
PlasmaWall XP Series Installation/Operation Manual