Nortel BCM 200 Technical Configuration Manual page 16

BCM Technical Configuration Guide
From the Polycom Administration window visible on the video monitor, complete the setup of the system as per
the documentation & practices provided by the manufacturer.
In addition, the following subset of setup information is provided as an example to follow. Each individual system
configuration will vary; your values will be different from these.
Admin / Network Setup:
•
Call Preferences
Select ISDN Video Calls (H.320)
o
Ensure that LAN/Internet Calls (H.323) is de-selected
o
Ensure that Display IP Dialing Extension is de-selected
o
•
IMUX
Number
o
Set Area Code to an appropriate value (i.e. 905)
Line1 B1: set to the extension used in the BCM, in this example it is 2484
Line1 B2: set to the extension used in the BCM, in this example it is 2485
SPIDs
o
We used the following pattern "00" + BCM DN + "00"
In this example Line1 B1: 00248400
Line1 B2: 00248500
ISDN Video (the values below were used for our testing)
o
Country Code: 1
Area Code: 905
Number A: 2484
Number B: 2485
ISDN Switch Protocol: NI-1
ISDN Dialing Prefix: leave blank
_______________________________________________________________________________________________________________________
NORTEL
V1.1
External Distribution
May, 2006
15