Line Modules; Fx11 - 8 Lc Fiber Ports; Tx01 - 16 Rj45 Ports - RuggedCom RUGGEDBACKBONE RX5000 Hardware Installation Manual

High-port density routing and switching platform

Hide thumbs Also See for RUGGEDBACKBONE RX5000:

Table of Contents

2. RuggedBackbone™ Modules

2.4. Line Modules

The RuggedBackbone™ RX5000 may be configured with up to six Line Modules. Line Modules are

installed in slots LM1 through LM6, as shown in

Modules are available depending on the required type and number of Ethernet ports:

• Four or eight port 10/100 BaseTX RJ45 (copper)

• Four or eight port 100FX single- or multi-mode fiber

• Four port 10/100/1000 BaseTX RJ45 (copper)

• Four port 1000LX single- or multi-mode fiber

Refer to the RuggedBackbone™ RX5000 datasheet for complete ordering details.

Figure 2.6. 16TX01 - 16 RJ45 Ports

RuggedCom® RuggedBackbone™

Figure 2.1, "Chassis Slot

Figure 2.7. 8FX11 - 8 LC Fiber Ports

Assignment". Different Line

RX5000 Installation Guide Rev 107

Table of Contents

Do you have a question about the RUGGEDBACKBONE RX5000 and is the answer not in the manual?