Specifications - Makita UR100D Instruction Manual

SPECIFICATIONS

Model:
No load speed
(without cutting tool)
Overall length
(without cutting tool)
Nylon cord diameter
Applicable cutting tool and
cutting diameter
Rated voltage
Standard battery cartridge
Net weight
without notice.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Noise
Applicable standard : EN50636
Nylon cutting head
Plastic blade
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
Vibration
Applicable standard : EN50636
Nylon cutting head
Plastic blade
NOTE: The declared vibration emission value has been measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in addition to the trigger time).
Nylon cutting head
(P/N 198852-2 / 198853-0)
Plastic blade head
(P/N 198847-5 / 198848-3)
Type
Type
D.C. 10.8 V - 12 V max
BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
Sound pressure level average
L (dB(A))
PA
74
75.8
Left hand
2
a (m/s ) Uncertainty K
h,W
(m/s
0.1
2.5
0.1
2.5
2 ENGLISH
UR100D
-1
10,000 min
835 - 1,185 mm
1.65 mm
260 mm
230 mm
1.9 - 2.1 kg
Uncertainty K (dB(A))
0.74
2.84
Right hand
2
a (m/s ) Uncertainty K
h,W
2
)
2.5
2.5
2
(m/s )
0.5
0.1