Operation - Makita UR100D Instruction Manual

3. Place the plastic blade head onto the spindle and
tighten it by turning it clockwise.
1. Plastic blade head
Remove the hex wrench.
To remove the plastic blade, turn it counterclockwise
while locking the spindle with the hex wrench.
Attaching the shoulder harness
1
1. Hook
Attach the hooks of the shoulder harness to the tool as
CAUTION:
Be sure to attach the hooks of the
shoulder harness to the tool securely. If the hooks
are attached incompletely, they may come off and
cause injury.
CAUTION:
wrench inserted in the tool head. It may cause
1
When not in use, store the hex wrench as shown in the
1. Hex wrench

OPERATION

Cutting the grass
Hold the grass trimmer at the angle of about 50° to the
ground. Move the grass trimmer from right to left slowly.
Cut the grass a few times from the top of the grass at
the tip of the nylon cord or with the blade.
NOTICE:
Do not cut high grass at a time. Cutting
the high grass at a time near the root may cause the
nylon cutting head or plastic blade to be entangled by
grass. This may cause the motor overload, resulting
in damage to the grass trimmer.
NOTICE:
Use the grass trimmer without getting
the spool or plastic blade into a contact with the
ground surface. Using the spool or plastic blade
contacting the ground surface may cause the motor
under overload resulting in damage to the grass
trimmer.
12 ENGLISH
1