1. Manuals
  2. Brands
  3. Makita Manuals
  4. Trimmer
  5. UR101C
  6. Instruction manual

Makita UR101C Instruction Manual

Battery powered
Hide thumbs Also See for UR101C:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Battery Powered Grass Trimmer
UR101C
UR201C
Read before use.

Advertisement

Table of Contents
loading

Related Manuals for Makita UR101C

Summary of Contents for Makita UR101C

  • Page 1 INSTRUCTION MANUAL Battery Powered Grass Trimmer UR101C UR201C Read before use.

  • Page 2: Specifications

    SPECIFICATIONS Model: UR101C UR201C Handle type Bike handle Loop handle No load speed 3: 0 - 7,000 min (at each rotation speed level) 2: 0 - 5,500 min 1: 0 - 4,600 min Overall length 1,760 mm 1,795 mm (without cutting tool) Nylon cord diameter 2.4 mm...
  • Page 3 Work area safety Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away Keep work area clean and well lit. Cluttered or from moving parts. Loose clothes, jewellery or dark areas invite accidents. long hair can be caught in moving parts. Do not operate power tools in explosive atmo- If devices are provided for the connection of spheres, such as in the presence of flammable...

  • Page 4: Intended Use

    Keep cutting tools sharp and clean. Properly Important safety instructions for the tool maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. WARNING: Be sure to thoroughly read and under- Use the power tool, accessories and tool bits stand this instruction manual as well as the instruction etc.

  • Page 5: Work Area Safety

    Wear ear protection such as ear muffs to pre- Do not charge battery in rain, or in wet vent hearing loss. locations. Wear proper clothing and shoes for safe Do not replace the battery with wet hands. operation, such as a work overall and sturdy, Do not replace the battery in the rain.

  • Page 6: Cutting Tools

    The unattended tool with the Do not use a cutting tool which is not recom- mended by Makita. battery cartridge installed may be used by unau- thorized person and cause serious accident.
  • Page 7 Kickback (Blade thrust) To reduce the risk of "white finger disease", keep your hands warm during operation and Kickback (blade thrust) is a sudden reaction well maintain the tool and accessories. to a caught or bound cutting blade. Once it occurs, the tool is thrown sideway or toward Transport the operator at great force and it may cause...

  • Page 8: First Aid

    Before using battery cartridge, read all instruc- causing fires, personal injury and damage. It will tions and cautionary markings on (1) battery also void the Makita warranty for the Makita tool and charger, (2) battery, and (3) product using charger.

  • Page 9: Parts Description

    PARTS DESCRIPTION UR201C UR101C Speed indicator ADT indicator Caution lamp Main power button (ADT = Automatic Torque Drive Technology) Reverse button Plug Lock-off lever Switch trigger Hanger Handle Barrier Knob Protector Protector extension (for Hanging band nylon cutting head /...

  • Page 10: Functional Description

    Main power switch FUNCTIONAL DESCRIPTION Tap the main power button to turn on the tool. To turn off the tool, press and hold the main power button until the speed indicator goes off. WARNING: Always be sure that the tool is switched off and the portable power pack is disconnected from the tool before adjusting or checking function on the tool.
  • Page 11 UR101C Speed indicator Mode Rotation speed High 0 - 7,000 min Medium 0 - 5,500 min 0 - 4,600 min ► 1. Lock-off lever 2. Switch trigger Automatic Torque Drive Technology UR201C When you turn on the Automatic Torque Drive Technology (ADT), the tool runs at optimum rotation speed and torque for the condition of grass being cut.

  • Page 12: Electronic Function

    Installing the handle reverse direction when you pull the switch trigger. To return to regular rotation, release the trigger and wait For UR101C until the cutting tool stops. Insert the shaft of the handle into the grip. Align the screw hole in the grip with the one in the shaft.
  • Page 13 Place the handle between the handle clamp and Hex wrench storage handle holder. Temporarily attach the handle by tightening the CAUTION: Be careful not to leave the hex knob, and adjust the handle position. wrench inserted in the tool head. It may cause Fully tighten the knob.
  • Page 14 For nylon cutting head / plastic blade Correct combination of the cutting tool and the protector CAUTION: Take care not to injure yourself on the cutter for cutting the nylon cord. CAUTION: Always use the correct combi- Attach the protector to the clamp using bolts. After nation of cutting tool and the protector.

  • Page 15: Cutter Blade

    To remove the cutter blade, follow the installation proce- dures in reverse. Nylon cutting head NOTICE: Be sure to use genuine Makita nylon cutting head. There are two types of nylon cutting head; the bump & feed type and the manual feed type.

  • Page 16: Operation

    Plastic blade Manual feed type NOTICE: Be sure to use genuine Makita plastic blade. ► 1. Nut 2. Nylon cutting head 3. Spindle 4. Hex wrench Insert the hex wrench through the hole in the gear ► 1. Plastic blade 2. Spindle 3. Hex wrench 4. Loosen case to lock the spindle.
  • Page 17 Pull out the cord from the right side of the portable Attaching hanging band to the shoulder belt and power pack. When pulling out the cord, be sure to set waist belt the cord in the holders as shown in the figure. ►...
  • Page 18 Attach the tool to the shoulder harness using UR201C the hook on the hanging band. Be sure to hook on the hanger of the tool. UR101C ► 1. Plug 2. Socket 3. Triangle marking Adjust the cord length using the holder as necessary.

  • Page 19: Starting The Operation

    Adjusting the hanger position Starting the operation For UR101C only CAUTION: Before operation, finish adjusting For more comfortable handling of the tool, you can the working position by following the instructions change the hanger position. in the section for the working position.
  • Page 20 When inserting, align the triangle marking on both the plug and the socket. UR101C Attach the tool to the shoulder harness using the hook on the hanging band. Be sure to hook on the hanger of the tool.
  • Page 21 Correct positioning and handling allow optimum control and reduce the risk of injury caused by kickback. CAUTION: In case of emergency detachment, UR101C pay extra attention to the position of the rotating cutting tool. In case of emergency, detach the tool in either way...

  • Page 22: Maintenance

    To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Cleaning the tool Clean the tool by wiping off dust, dirt, or cut off grass with a dry cloth or one dipped in soapy water and wrung out.
  • Page 23 95-M10L 100 mm 80 mm 23 ENGLISH...
  • Page 24 B&F ECO 4L 100 mm 80 mm 24 ENGLISH...
  • Page 25 UN-74L, UN-72L 4.5 m 100 mm 25 ENGLISH...
  • Page 26 Manual feed type Replacing the plastic blade When the nylon cord gets short, pull it out from the Replace the plastic blade if it is worn out or broken. eyelet and feed it from the another eyelet. 0.75 m When installing the plastic blade, align the direction of the arrow on the blade with that of the protector.

  • Page 27: Troubleshooting

    Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace- ment parts for repairs.
  • Page 28 Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885763A918 www.makita.com 20191106...

This manual is also suitable for:

Ur201c

Table of Contents