Specifications - Makita UR016G Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Handle type
No load speed
(at each rotation speed level)
Overall length
(without cutting tool and battery)
Nylon cord diameter
Applicable cutting tool and
cutting diameter
Rated voltage
Net weight
Protection degree
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
WARNING:
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
2-tooth blade
(P/N 197997-3)
3-tooth blade
(P/N 195298-3)
4-tooth blade
(P/N 195150-5)
Nylon cutting head
(P/N 191D89-4)
Plastic blade
(P/N 198383-1)
UR016G
Bike handle
D.C. 36 V - 40 V max
4.7 - 5.3 kg
BL4020 / BL4025 / BL4040 / BL4050F
DC40RA / DC40RB / DC40RC
12 ENGLISH
UR017G
Loop handle
-1
3: 6,500 min
-1
2: 5,300 min
-1
1: 3,500 min
1,792 mm
2.0 mm
230 mm
230 mm
230 mm
330 mm
255 mm
4.2 - 4.8 kg
IPX4
PDC01 / PDC1200