Key Gain Adjustment; Listen Volume Adjustments - RTS CLD Color Keypanel Family DKP 16 CLD User Manual

Key Gain Adjustment

The Key Gain Adjustment is used to change the crosspoint listen gain on a specific key from the Matrix. This adjustment is
automatically reflected in AZedit on the Crosspoint Gains window. (System|Gains|Crosspoint).
The range for this feature is Mute, -80dB to +6dB.
NOTE: A listen assignment must be configured for key gain to be enabled on a keypanel key.
To change key volumes, do the following:
On the KP 32 CLD front panel
1.
•
press the keypanel key to the right to increase the listen gain for the selected key assignment.
• press the keypanel key to the left to decrease the listen gain for the selected key assignment.
A volume status bar (
Adjusting Key Volumes
FIGURE 15.

Listen Volume Adjustments

By default, the Main Volume control adjusts the listen volume for the speaker (front/rear) or headset (front/rear), whichever is
shown in the keypanel display. The main volume adjusts the level of incoming audio from the intercom matrix.
+10dB to -48dB and Mute
Main Volume ranges from
To adjust listen volume level, do the following:
> On the KP 32 CLD, turn the MAIN VOLUME encoder to the right to increase the volume for the listen destination
OR
Turn the MAIN VOLUME encoder to the left to decrease the volume for the listen destination.
) and the volume level, in dB, appear on the specified key in the display window.
.
29