Page 1
USER INSTRUCTIONS MKP-4 KEYPANEL ADAM™, ADAM™ CS, AND ZEUS™ INTERCOM SYSTEMS L i s t e n l l W a i t i n g l u m MKP-4 Keypanel ™ 9350-7647-000 Rev A, 5/99...
This warranty is the sole and exclusive express warranty given sior or similar shock-absorbing material. All shipments must be with respect to RTS products. It is the responsibility of the user to sent to the following address and must include the Return Authori- determine before purchase that this product is suitable for the zation.
Page 3
4. Limited Liability: The liability of the Company for any claims arising out of this License based upon the Software, regardless of the form of action, shall not exceed the greater of the license fee for the Software or $50. 38109-709 Rev A 10/97 User Instructions MKP-4 Keypanel 3...
Page 4
This page intentionally left blank. 4 User Instructions MKP-4 Keypanel...
(where activating the key The MKP-4 Modular Keypanel can be rack mounted or used also activates all keys to the left of that key). Keys on a desktop. It is ideal for users who want access to the feature momentary or latching operation.
Audio Performance SNR at 8 dBu (A-weighted): > 70 dB TIF Enable/Disable: Currently, the MKP-4 can an- THD+N at 8 dBu (Unweighted): < 0.5% swer incoming telephone calls received by an RTS Frequency Response at 8 dBu: ± 1.5 dB from 100 Hz - Model TIF-951 Telephone interface.
Save all packing materials, and request an immediate inspection by the carrier’s insurance claims Open: Default setting. TIF-951 operation enabled. agent. Close: MKP-4 cannot answer incoming calls to TIF-951. The container should contain the following items: Description: The MKP-4 can answer incoming telephone Quantity...
For each group, intercom port connectors intercom port number to which the MKP-4 will be con- are labeled ID 1, ID 2, etc. When you connect an MKP-4 nected. Then, read across to the “Address” column to find keypanel to Zeus, set the MKP-4 Address switch to match the Address number.
Side-By-Side Rack Mount Configuration Using an MCP1 Rack Mount Kit Single-unit Rack Mount Configuration Using an MCP2 Rack Mount Kit Console Mount Configuration Using an MCP3 Console Mount Kit Tandem Configuration Using an MCP4 Tandem Mount Kit Figure 2. Optional Mounting Configurations User Instructions MKP-4 Keypanel 11...
TO INTERCOM SYSTEM* 2.4.1 Mic Connector DATA To connect a panel microphone, such as the RTS model MCP5 or MCP6, screw the microphone into the Mic connector on the front panel of the MKP-4. AUDIO TO MATRIX For Mic connector specifications, see page 8.
ZEUSedit or ADAMedit. Note: If you you typed. For example, there is a topic that tells you assign talk level 1 from the MKP-4, it will erase any talk how to access UPL Resources. Once you access UPL level 2 assignment that you previously assigned using Resources, again press the F1 key for help.
Press the Clear button to return to normal operation desired setup page. after assigning keys. Otherwise, if you do nothing, the MKP-4 will automatically return to normal Tap the Copy button to assign the selected setup operation after about 30 seconds.
Talk+Auto-mute (AM) Listen Key Assignment: The down position activates talk. And, if listen is on, it auto- matically turns off until talk is released. When talk is off, listen may be turned on independently by pressing up. User Instructions MKP-4 Keypanel 15...
TIF-951. A talk and listen currently talking. You cannot talk at this time. key pair on the MKP-4 must be assigned to talk/listen to the TIF-951 as previously described. Use the assigned 2) When there is an incoming telephone call to a...
Call Waiting key.) Hold down the Call Waiting key. Unless there is an incoming call to answer, activating a key on the MKP-4 that is assigned to the TIF-951 While holding down the Call Waiting key, tap the will have no effect.
Need help?
Do you have a question about the MKP-4 and is the answer not in the manual?
Questions and answers