Setup The Programmable I/O - Icop VEX-SOM User Manual

VEX-SOM User Manual

Setup the programmable I/O

Below are the steps to setup the I/O in your VEX-SOM.
Please write down your I/O requirement.
1. Fill in the VEX-SOM I/O Selection Table. (Note)
2. Finish the table and print it out.
3. Follow that table to setup in SocCfgTool
4. Get the 240 bytes file.
5. Update the 240 bytes file on your VEX-SOM.
6. Done.
-Please see the video tutorial from
https://www.youtube.com/watch?v=gbLG_BzeuZs .
Note: The VEX-SOM I/O Selection Table is in Appendix A which is in the
end of this document.
We strongly recommend you to contact your ICOP contact
window to configure your SOC, or mail to info@icop.com.tw.
ICOP Technology Inc. 20