Problem Of Windows Stop Error - NEC Express5800/R110i-1 Maintenance Manual

Chapter 1 Maintenance
 Is the EXPRESSBUILDER DVD inserted?

Remove the EXPRESSBUILDER DVD and retry.
 Is a cartridge inserted into built-in RDX (USB)?

Either remove the cartridge or change the boot order in BIOS Setup.
 Is a disk array unit connected to the PCI card?

Change the boot device configuration from HDD Drive BBS Priorities of the BIOS Setup Boot menu.
[?] The following message appears when logging on Windows Server 2008 R2
 Have you finished license authentication for Windows product?

The above message will appear if you use Windows Server 2008 R2 with the unauthenticated license.
Select Get Genuine now and proceed license authentication.
The above message is an example of request for license authentication. The message displayed on
screen may differ from this depending on the license.
5.5

Problem of Windows STOP Error

[?] Unable to turn the power OFF at the blue screen (STOP error screen)

Continue to press the power switch for at least four seconds to turn off the server.
34
Express5800/R110i-1, T110i-S, T110i Maintenance Guide
5. Troubleshooting