NEC Express5800/R110i-1 Maintenance Manual page 94

Chapter 2 Useful Features
Thermal Sensor
Check previous System Config
BMC IRQ
Post Error Pause
Memory Error
Power Switch Inhibit
CLI SETUP
94
Option
Disabled
[Enabled]
[Disabled]
Enabled
[Disabled]
IRQ 11
Disabled
[Enabled]
Halt
[Boot]
[Disabled]
Enabled
[Disabled]
Enabled
Express5800/R110i-1, T110i-S, T110i Maintenance Guide
Parameter
Enables or disables the thermal sensor
monitoring. If this option is set to Enabled
and when abnormal temperature is detected,
the system stops at the end of POST.
If this option is set to Enabled and the
system configuration differs from the
previous boot, the system waits for user's
intervention before booting.
Specifies whether to assign an interrupt line
to the BMC.
Specifies whether to stop the POST once at
the end of POST if an error occurs during the
POST.
Specifies whether to stop operation at the
end of POST processing if a memory
resource error occurred while executing
POST.
This option is enabled if POST Error Pause
in the Server menu is enabled.
Even if this option is set to Boot, operation
stops at the end of POST if errors occurred
for all resources.
Enables or disables the power switch inhibit
feature.
Specifies whether to use Command Line
Interface (CLI).
Enabled : SETUP is run by CLI instead of
the menu operation. To switch back to the
menu operation, set this option to Disabled
on CLI.
1. System BIOS
(2/2)
Description