NEC Express5800/R110i-1 Maintenance Manual page 37

Express server express5800 series
Hide thumbs Also See for Express5800/R110i-1:
Table of Contents

Advertisement

Chapter 1 Maintenance
[?]
When N8190-159/160 is used, the names of the Fibre Channel controllers appear with different names on
Device Manager
 When N8190-159/160 is used in Windows, a different controller name may be displayed per controller in
Device Manager. To display the correct controller name, please perform the following.
Start command prompt and then open the folder under the system drive (drive C), enter the following file, and
run the file.
Windows Server 2016:
C:\Program Files(x86)\EXPRESSBUILDER\repository\016\win\winnt\drivers
\01_storage\1_ao_04\utl\friendlyname.exe
Windows Server 2012 R2:
C:\Program Files(x86)\EXPRESSBUILDER\repository\016\win\winnt\drivers
\01_storage\1_ao_03\utl\friendlyname.exe
Windows Server 2012:
C:\Program Files(x86)\EXPRESSBUILDER\repository\016\win\winnt\drivers
\01_storage\1_ao_02\utl\friendlyname.exe
Windows Server 2008 R2:
C:\Program Files(x86)\EXPRESSBUILDER\repository\016\win\winnt\drivers
\01_storage\1_ao_01\utl\friendlyname.exe
If using EXPRESSBUILDER DVD, run the following file.
Windows Server 2016:
\016\win\winnt\drivers\01_storage\1_ao_04\utl\friendlyname.exe
Windows Server 2012 R2:
\016\win\winnt\drivers\01_storage\1_ao_03\utl\friendlyname.exe
Windows Server 2012:
\016\win\winnt\drivers\01_storage\1_ao_02\utl\friendlyname.exe
Windows Server 2008 R2:
\016\win\winnt\drivers\01_storage\1_ao_01\utl\friendlyname.exe
[?]
Unable to detect RDX devices and USB devices by System Recovery Options
 Is the USB3.0 driver installed on the system?
See Chapter 1(6.Windows System Recovery) to install the USB3.0 driver.
[?]
The keyboard or mouse does not work by System Recovery Options
 Did you select Disabled for XHCI Hand-off?
See Chapter 2 (1. System BIOS) for details.
Advanced → USB Configuration → XHCI Hand-off → Disabled
Select Enabled for XHCI Hand-off after System Recovery Options finished.
Advanced → USB Configuration → XHCI Hand-off → Enabled
Express5800/R110i-1, T110i-S, T110i Maintenance Guide
5. Troubleshooting
37

Advertisement

Table of Contents
loading

Table of Contents