NEC Express5800/R110i-1 Maintenance Manual page 128

Chapter 2 Useful Features
◇Virtual Drive
◇Virtual Drives
◇Initialize
◇Check Consistency
◇View/Update Parameters
・RAID
・SIZE
・Stripe SIZE
・#Stripes
・State
・Spans
・Disk WC
・Read Ahead
◇Physical Drive
◇Physical Drive Selection Menu
◇Make HotSpare
◇Force Online
◇Change Drv State
◇Device Properties
・Device Type
・Media Type
・Capacity
・Product ID
・Revision No.
・Link Speed
◇Rebuild
◇Check Consistency
128
Operation of Virtual Drive
Select Virtual Drive (if two or more Virtual Drives exist)
Initialize Virtual Drive
Check consistency of Virtual Drive
Display Virtual Drive information
Display RAID level
Display Virtual Drive size
Display Stripe size
Display number of physical devices included in Virtual Drive
Display Virtual Drive status
Display setting of Virtual Drive
Display Write Cache Policy of Virtual Drive
Display Read Ahead Policy of Virtual Drive
Operation of physical drive
Select a physical drive
Specify hot-spare disk used for Auto Rebuild
Forcibly make physical device online
Forcibly make offline if the physical device drive is included in Virtual Drive.
Cancel hot-spare if the physical device is specified as hot-spare disk.
Display hardware information
Device type
Media type(HDD or SSD)
Capacity
Product ID
Revision No.
Transfer rate
Execute Rebuild
Check Consistency of Virtual Drive
Express5800/R110i-1, T110i-S, T110i Maintenance Guide
5. RAID System Configuration