Manual Rebuild - NEC Express5800/R110i-1 Maintenance Manual

Chapter 2 Useful Features
5.6.2

Manual Rebuild

1. Replace a physical device, and then restart the server.
2. Run LSI Software RAID Configuration Utility.
3. From the TOP menu, select Drive Management, and then Select Drive Operations.
The following screen appears.
4. Confirm that the target physical device is displayed for Select Drive.
By default, Rebuild starts automatically after you replace the physical device.
Tips
Important In the UEFI Mode, Rebuild on the LSI Software RAID Configuration Utility
takes long time. Run Rebuild from the Universal RAID Utility on the OS.
If you need to run Rebuild on the LSI Software RAID Configuration Utility,
follow the procedure below.
Replace a physical device
Run LSI Software RAID Configuration Utility
Perform the Rebuild process
Exit LSI Software RAID Configuration Utility
Express5800/R110i-1, T110i-S, T110i Maintenance Guide
5. RAID System Configuration
161