NEC Express5800/R110i-1 Maintenance Manual page 156

Chapter 2 Useful Features
4)
5)
6)
156
Select Apply Changes, and then OK on the next screen.
Note You may select either of the upper or lower Apply Changes which is provided at
two locations.
Select values for Virtual Drive Name, Virtual Drive Size, and Virtual Drive Size Unit.
5-1. Virtual Drive Name: Specify the name of the virtual drive. (Optional).
5-2. Virtual Drive Size: Specify the capacity of the virtual drive.
5-3. Virtual Drive Size Unit: Specify the unit (MB/GB/TB) used for Virtual Drive Size.
Important The Disk WC and Read Ahead settings reflect the original Drive Group
setting. If you
change these settings, the original Drive Group setting is also changed.
When all the settings are completed, select Save Configuration.
Note You may select either of the upper or lower Save Configuration which is provided
at two locations.
Express5800/R110i-1, T110i-S, T110i Maintenance Guide
5. RAID System Configuration