NEC Express5800/R110i-1 Maintenance Manual page 191

Chapter 3 Appendix
Error Message
B002 Expansion ROM not
initialized - PCI Slot 2
(Express5800/T110i,
T110i-S)
B003 Expansion ROM not
initialized - PCI Slot 3
(Express5800/T110i,
T110i-S)
B004 Expansion ROM not
initialized - PCI Slot 4
(Express5800/T110i,
T110i-S)
Expansion ROM not
initialized - PCI Slot 1C
(Express5800/R110i-1)
B01A Expansion ROM not
initialized - PCI Slot 1A
(Express5800/R110i-1)
B022 Serial Port Configuration
Overlapped.
B200 Onboard VGA - PCIe Link
Failure
B201 Onboard LAN 1 - PCIe Link
Failure
B202 Onboard LAN 2 - PCIe Link
Failure
B211 PCI Slot 1 - PCIe Link
Failure
(Express5800/T110i,
T110i-S)
PCI Slot 1A - PCIe Link
Failure
(Express5800/R110i-1)
B212 PCI Slot 2 - PCIe Link
Failure
(Express5800/T110i,
T110i-S)
PCI Slot 1B - PCIe Link
Failure
(Express5800/R110i-1)
B213 PCI Slot 3 - PCIe Link
Failure
(Express5800/T110i,
T110i-S)
B214 PCI Slot 4 - PCIe Link
Failure
(Express5800/T110i,
T110i-S)
B215 PCI Slot 1C - PCIe Link
Failure
(Express5800/R110i-1)
B221 Onboard LAN 1 - PCIe Link
Width Error
B222 Onboard LAN 2 - PCIe Link
Width Error
B231 PCI Slot 1 - PCIe Link Width
Error
(Express5800/T110i,
T110i-S)
PCI Slot 1A - PCIe Link Width
Error
(Express5800/R110i-1)
Description
Option ROM expansion in PCI slot
2 failed.
Option ROM expansion in PCI slot
3 failed.
Option ROM expansion in PCI slot
4 failed.
Option ROM expansion in PCI slot
1C failed.
Option ROM expansion in PCI slot
1A failed.
Overlapping serial port
configuration was detected.
A PCIe bus connection failure was
detected by the onboard VGA
controller.
A PCIe bus connection failure was
detected on the onboard LAN1
port.
A PCIe bus connection failure was
detected on the onboard LAN2
port.
A PCIe bus connection failure was
detected in PCI slot 1.
A PCIe bus connection failure was
detected in PCI slot 1A.
A PCIe bus connection failure was
detected in PCI slot 2.
A PCIe bus connection failure was
detected in PCI slot 1B.
A PCIe bus connection failure was
detected in PCI slot 3.
A PCIe bus connection failure was
detected in PCI slot 4.
A PCIe bus connection failure was
detected in PCI slot 1C.
A PCIe bus link width error was
detected on the onboard LAN1
port.
A PCIe bus link width error was
detected on the onboard LAN2
port.
A PCIe bus link width error was
detected in PCI slot 1.
A PCIe bus link width error was
detected in PCI slot 1A.
Express5800/R110i-1, T110i-S, T110i Maintenance Guide
Action
If the PCI board does not connect to a bootable
device, disable the Option ROM Scan for that
board.
Run SETUP, select Advanced  Serial Port
Configuration, and specify the different settings
for Serial Port A and Serial Port B.
If the PCI board does not connect to a bootable
device, disable the Option ROM Scan for that
board.
Run SETUP, select Advanced  Serial Port
Configuration, and specify the different settings
for Serial Port A and Serial Port B.
Run SETUP, select Advanced  Serial Port
Configuration, and specify the different settings
for Serial Port A and Serial Port B.
Contact your sales representative.
1. POST Error Message
(2/5)
191