Table of Contents
Advertisement
1.1 Contents of Package
•
OS3300 EFM Router
•
External power supply for OnSite Model 3300
•
Ethernet cable with RJ45 plugs on each end (included)
1.2 What you will need
•
Default unit IP address: 192.168.200.10
•
Default username: admin
•
Default password: (no password)
•
PC Computer
1.3 Identify the connector and attach the cables
All connectors are on the rear panel of the OS3300 Router.
Connect the DSL Interface
To function properly, the OS3300 must be connected using a twisted-pair, uncondi-
tioned, dry, metal wire, between 19 (0.9mm) and 26 AWG (0.4mm). Leased circuits that
run through signal equalization equipment are not acceptable.
The EFM Router is equipped with a RJ-45 interface jack (DSL), which conforms to the
T568B standard. Any standard Category 5e cable can be used to directly connect two
routers. Depending on the router model, it will have a two-wire, four-wire or eight-wire
interface. Observe the signal/pin relationship on the OS3300's DSL interface jack for
each pair in
figure 2
cable with a RJ-45 jack on one end and four RJ-11jacks on the other.
OnSite OS3300 Quick Start Guide
1.0 Hardware Installation
Figure 1.
OS3300 EFM Router rear panel connectors
on page 4.
Figure 4
on page 4 shows the proper way to wire a
3
Advertisement
Table of Contents
