2. Plug one end of the cable into the transmit socket (labeled TX) on the OnSite
device. Plug the other end of the cable into the receive port of the E1 device.
3. Plug one end of the cable into the receive socket (labeled RX) on the OnSite device.
Plug the other end of the cable into the transmit port of the E1 device.
To finish configuring your OnSite device, and for detailed information about installing,
configuring, operating, and troubleshooting, refer to the OnSite Model 2701A/I E1/T1
Ethernet Bridge (NTU) User Manual available online at www.patton.com/manuals/.
7.0 Customer and Technical Support
Toll-Free VoIP support: call
Online support:
www.patton.com
E-mail support: support@patton.com—answered within 1 business day
Telephone support:
Standard
USA
Alternate Switzerland +41 (0)31-985-2555 Monday–
A.1 Compliance
EMC:
FCC Part 15, Class A
•
EN55022, Class A
•
EN55024
•
Safety:
UL60950-1/CSA C22.2 No. 60950-1
•
IEC/EN 60950-1
•
AS/NZS 60950-1
•
OnSite 2701A/I Quick Start Guide
6.0 Complete the installation
sip:support@patton.com
+1 (301) 975-1007
A.0 Compliance Information
with a VoIP SIP phone
Monday–
8:00 am–5:00 pm
Friday
EST (1300–2200 UTC/GMT)
8:00 am–5:00 pm
Friday
CET (0900–1800 UTC/GMT)
7