Round Cable Ii - Omron CS1W-CRM21 Operation Manual

Preparing and Mounting Flat Connectors
Tools Required
Name
Pliers
Pliers
4-3-1

Round Cable II

Preparing and Mounting DCN4-TR4 Flat Connector Sockets
76
Appearance Model
DWT-A01
DWT-A02
A Flat Connector must be mounted on a Round Cable II cable only when a
Terminal Resistor is attached to it.
■ Component Names
Cover
Cable labels
(Flat cable: black, blue, white, and red)
Cable confirmation slot
■ Preparing the Cable
At the tip of cable, make a cut line perpendicular to the cable length on the
sheath, and strip the sheath.
■ Setting the Cable Stopper
Set the cable stopper. Close the cover. Secure the hooks. Press down on the
cable stopper until it clicks into place.
Application
Crimping tool for DCN4-TR4 Flat Connector
Socket or DCN4-BR4 Flat Connector Plug
Crimping tool for DCN5-TR4 Flat Connector
Socket or DCN5-BR4 Flat Connector Plug
Housing
Black
Green or Blue
Section 4-3
Red
White
Black